Compact for narrow aisles.
A 660 mm minimum pass width and 950 mm minimum turning width allow operation in narrow aisles and compact commercial layouts.
Gausium Mira – Agile Cleaning Robot for Midsize Commercial Floors
Gausium Mira is an agile cleaning robot for midsize hard floors in supermarkets, retail, healthcare, education and other high-traffic indoor environments. It sweeps and scrubs in one pass, travels through clearances from 660 mm and adapts quickly to layout changes with Drop & Go. FrisiLogix offers Mira for purchase, leasing or rental.
€17,999
excl. VAT
660 mm
Minimum pass width
800–2,000 m²
Recommended cleanable area
500–800 m²/h
Practical floor output
up to 4 h
Runtime while scrubbing
Gausium Mira in action: sweeping and scrubbing in one pass
Applications for the Gausium Mira cleaning robot
Gausium Mira is designed for autonomous maintenance cleaning on midsize commercial hard floors. Before making a recommendation, we assess the floor covering, soil profile, narrow points, pedestrian traffic and cleaning times on site.
Gausium Mira at a glance
Agile cleaning robot for midsize hard floors: sweep and scrub in one pass, 660 mm clearance, Drop & Go and internal self-cleaning.
Up to 25 kg brush down pressure.
The dual-disc brush system delivers high mechanical cleaning performance across a 400 mm scrubbing width. Pad, water flow and detergent are matched to the floor covering.
Pre-sweeping before scrub-and-vacuum cleaning.
Two side brushes and a roller brush collect loose debris before the disc brushes scrub and the squeegee recovers dirty water.
Drop & Go: automatic deployment.
Mira captures its environment without time-consuming manual mapping. Cleaning zones, no-go areas and travel paths are configured and checked before routine operation.
Self-cleaning of the waste-water tank and suction path.
Automatic rinsing reduces residue and odours but does not replace the required daily inspection and cleaning.
Runtime by cleaning mode.
Depending on operating conditions, Mira runs for up to 10 hours while dust mopping, up to 8 hours while sweeping and about 4 hours while scrubbing.
- Dust mopping 10 h
- Sweeping 8 h
- Scrubbing 4 h
Narrow aisles: 660 mm minimum pass width and 950 mm minimum turning width
This practical test shows Gausium Mira travelling through a 660 mm-wide passage and turning within a 950 mm-wide area.
Phantas, Mira or Omnie?
The three models cover different floor profiles. Compare deployment, floor size and cleaning focus; final suitability is validated on your actual site.
Phantas
For compact spaces
- Applications
- Office, retail, public-facing areas
- Floor profile
- small to medium
- Cleaning focus
- all-in-one cleaning
- Battery runtime
- 4–14 h by cleaning mode
- Fresh-water tank / Waste-water tank
- 11.5 L / 10.5 L
Gausium Mira
Agile for midsize floors
- Applications
- Retail, shopping centers, offices, healthcare, hotels, education
- Floor profile
- 800–2,000 m² recommended cleanable area
- Cleaning focus
- midsize floors and narrow aisles
- Battery runtime
- approx. 3.3–10 h by cleaning mode
- Fresh-water tank / Waste-water tank
- 22 L / 20 L
Gausium Omnie
For complex environments
- Applications
- Retail, logistics, industry, sports hall, airport
- Floor profile
- medium to large, dynamic
- Cleaning focus
- complex environments
- Battery runtime
- 3–8 h by cleaning mode
- Fresh-water tank / Waste-water tank
- 33 L / 24 L
Buy, lease or rent Gausium Mira
The Gausium Mira purchase price is shown transparently. Leasing and rental are currently available on request, tailored to deployment duration, floor area and service requirements. After the site assessment, you receive a concrete quote for the robot, commissioning, training and service.
Purchase
€17,999
For long-term deployments. The net price covers the robot; commissioning, training, shipping and service are quoted after the site assessment.
Request purchase quoteLeasing
Leasing on request
For predictable monthly costs and flexible investment planning. We tailor term, rate and service scope to your project.
Request leasing quoteRental
Individual quote
For pilot projects, flexible deployment periods or getting started without an immediate purchase. Terms, service scope and availability are quoted for your project on request.
Request rental quoteGausium Mira: on-site demo, commissioning and service
Successful commissioning starts with a site assessment. Cleaning routes, responsibilities, training and daily care are then configured so that Gausium Mira operates reliably in day-to-day use.
-
01
Assess the floor and cleaning requirements
We record floor coverings, clearances, soil profile, pedestrian traffic, cleaning times and the charging, water and care processes.
-
02
Test Gausium Mira on site
The cleaning robot is tested on representative routes with real loose debris and typical adhered soil.
-
03
Commissioning and training
We configure cleaning zones, no-go areas and tasks and train operators in use, quality control and daily maintenance.
-
04
Service and maintenance during operation
FrisiLogix assists with optimisation, faults, scheduled maintenance and assessment of additional deployment areas.
Mira
Gausium Mira technical specifications
Dimensions & manoeuvrability
- Length × width × height
- 680 × 550 × 900 mm (excluding squeegee and side brush)
- Net weight
- 130 kg
- Minimum pass width
- 660 mm
- Minimum turning width
- 950 mm
- Gradeability
- 6° without cleaning, 3° while cleaning
- Max. cleaning speed
- 1.4 m/s
Cleaning
- Cleaning processes
- Sweeping + scrub-and-vacuum cleaning, sweeping, dust mopping
- Scrubbing, sweeping and dust-mopping width
- 400 / 750 / 620 mm
- Max. brush down pressure
- 25 kg
- Clean-/waste-water tanks
- 22 / 20 L
- Debris hopper
- 1.4 L
- Practical floor output according to the manufacturer
- 500–800 m²/h
- Theoretical floor output while scrubbing
- 2,016 m²/h
- Theoretical floor output while sweeping
- 3,780 m²/h
- Theoretical floor output while dust mopping
- 3,124 m²/h
* Practical and maximum figures are taken from the official Gausium specification. Actual floor output depends on factors including route, floor covering, soil, pedestrian traffic, turning manoeuvres, water changes and stops.
Energy
- Battery
- Lithium iron phosphate (LFP), 24 V / 60 Ah
- Runtime while scrubbing
- approx. 3.3–4.4 h, depending on settings and operating conditions
- Runtime while sweeping
- 6–8 h
- Runtime while dust mopping
- 7.5–10 h
- Charging time
- approx. 2.5 h
Navigation & automation
- Deployment
- Drop & Go – automatic deployment
- Localization
- SLAM with 3D LiDAR
- Environment sensing
- 3D LiDAR, front/rear LiDAR, 4 RGB cameras, front depth camera
- Maximum mapping area
- up to 120,000 m²
- Operating functions
- Zones, no-go areas, task reports, alerts, app, cloud, offline operation and over-the-air updates (OTA)
- Self-cleaning and daily care
- Automatic rinsing of the waste-water tank and suction path; daily inspection and cleaning remain required.
Matching workstation
WS-05 for Gausium Mira
For more automated charging, water handling and cleaning routines, Mira can be paired with the Gausium WS-05 Mira workstation.
Frequently asked questions about the Gausium Mira cleaning robot
Find the right purchase or leasing model
Send the floor area, floor type, narrowest clearance and cleaning cycle. FrisiLogix will assess fit and the right purchase or leasing model; rental remains available as an additional option.
Request purchase or leasing options