Sweep and scrub in one pass.
Two front side brushes collect debris in an integrated tray before rear disc brushes perform wet cleaning.
Gausium Marvel – Autonomous Sweeping Robot for Warehouses, Industry and Large Floors
Gausium Marvel is an autonomous commercial sweeping robot with scrubber-dryer functionality for large and complex hard floors. Two front side brushes collect loose debris in an integrated tray before rear disc brushes perform wet cleaning. Marvel therefore combines sweeping and scrubbing in one pass. Suitability depends on the floor, soil profile, traffic and operating process.
80 / 70 L
Clean-/waste-water tanks
55 kg
Cleaning pressure
850 mm
Minimum passage
5–7 h
Scrubbing runtime
Gausium Marvel in operation
Applications for the Gausium Marvel cleaning robot
Marvel is designed for large commercial hard floors with repeatable sweeping and scrub-and-vacuum tasks. Before making a recommendation, we assess the floor covering, soil profile, clearances, pedestrian and vehicle traffic, water handling and cleaning windows on site.
Gausium Marvel at a glance
Large-format sweep-and-scrub robot with high tank and battery capacity, 55 kg cleaning pressure and combined dry- and wet-cleaning processes.
80 L clean water and 70 L waste water.
The large tanks are designed for long cleaning routes. Actual range depends on factors including water flow, route, floor and soil level.
Up to 55 kg cleaning pressure.
High mechanical cleaning pressure supports wet cleaning; pad, water flow and detergent must be matched to the floor.
850 mm minimum passage.
Marvel requires a minimum passage width of 850 mm and a minimum U-turn width of 1,300 mm. Safety clearances and temporary obstacles must be considered on site.
SLAM, 3D LiDAR and 360° vision.
Marvel uses SLAM-based localization with 3D LiDAR and 360° vision for environment sensing. Gausium lists people, vehicles, escalators, carpets, wires and glass doors; this is not a guarantee of complete detection or collision avoidance.
Runtime matched to the cleaning mode.
Gausium specifies 5–7 hours while scrubbing, at least 8 hours while sweeping and at least 10 hours while dust mopping. Internal functions rinse the waste-water tank and suction path but do not replace daily inspection, cleaning or scheduled maintenance.
For large operating floors with combined cleaning tasks
Marvel is designed for large commercial hard floors where loose debris and adhered soil are handled on repeatable routes. A reliable recommendation always requires an on-site assessment of floor type, soil profile, clearances, traffic, water handling and cleaning windows.
Buy, lease or rent Gausium Marvel
Gausium Marvel is offered with price on request. After the site and use-case assessment, you receive an individual quote covering the robot, possible WS-05 configuration, commissioning, training and service. No generic purchase, leasing or rental prices are published.
Purchase
For long-term deployments. Package scope, workstation, commissioning, training and service are quoted for the floor and operating process.
Request purchase quoteLeasing
For planned investment periods. Term, configuration, service scope and financing conditions are defined only in the individual project quote.
Request leasing quoteRental
For pilot projects or time-limited deployments. Term, availability, configuration and service are assessed and quoted for the project.
Request rental quoteGausium Marvel: site assessment, demo, commissioning and service
Reliable operation on large floors starts with an assessment of the real deployment conditions. We then configure routes, water and charging processes, responsibilities, training and maintenance for the site.
-
01
Assess the floor and operating process
We record floor coverings, clearances, soil profile, pedestrian and vehicle traffic, cleaning windows and the water, charging and care processes.
-
02
Demonstrate Marvel on site
The robot is tested on representative routes with typical loose debris and adhered soil; practical output and intervention requirements are documented.
-
03
Commissioning and training
We configure cleaning zones, no-go areas and tasks and train operators in use, quality control, daily cleaning and safe manual processes.
-
04
Service and maintenance in operation
FrisiLogix assists with optimisation, faults, wear parts, scheduled maintenance and assessment of additional deployment areas.
Marvel
Gausium Marvel technical specifications
Dimensions & manoeuvrability
- Length × width × height
- 1,108 × 699 × 1,168 mm
- Net weight
- 220 kg
- Minimum passage width
- 850 mm
- Minimum U-turn width
- 1,300 mm
- Gradeability
- 10°
- Maximum speed
- 1.4 m/s
Cleaning
- Cleaning processes
- Sweeping + scrubbing in one pass · sweeping · dust mopping
- Scrubbing width
- 600 mm
- Sweeping width
- 840 mm
- Dust-mopping width
- 760 mm
- Maximum cleaning pressure
- 55 kg
- Clean-/waste-water tanks
- 80 / 70 L
- Theoretical max. scrubbing output (Gausium test value)
- 3,024 m²/h
- Theoretical max. sweeping output (Gausium test value)
- 4,234 m²/h
- Theoretical max. dust-mopping output (Gausium test value)
- 3,830 m²/h
* The theoretical maxima are based on Gausium tests and are not guarantees of practical productivity. Actual output varies with factors including route, floor, soil, traffic, turning, water handling, stops and required interventions.
Energy & runtime
- Battery
- Lithium iron phosphate (LFP), 120 Ah
- Scrubbing runtime
- 5–7 h
- Sweeping runtime
- ≥ 8 h
- Dust-mopping runtime
- ≥ 10 h
Navigation & operation
- Localization
- SLAM-based with 3D LiDAR
- Environment sensing
- 3D LiDAR and 360° vision system
- Object sensing listed by Gausium
- People, vehicles, escalators, carpets, wires and glass doors; no guarantee of complete detection or collision avoidance
- Manual transport
- Power-assisting handle bar; optional stand-on pedal
- Internal rinsing functions
- Automatic rinsing of the waste-water tank and suction path; daily inspection, cleaning and scheduled maintenance remain necessary.
Intended workstation
WS-05 variant for Gausium Marvel
The robot-specific WS-05 Marvel variant can automate charging, clean-water refill, waste-water drainage and rinsing of the suction pipe, squeegee and waste-water tank. Variant, connections, placement and package contents are confirmed for each project.
Frequently asked questions about the Gausium Marvel cleaning robot
Request an individual Marvel quote for your site
Send the floor area, floor type, soil profile, narrowest clearance and cleaning windows. FrisiLogix assesses suitability and prepares an individual quote covering the robot, possible WS-05 configuration, commissioning, training and service.
Request an individual quote